Jumbo Backdrop Stand

JUMBO BACKDROP STAND SET-UP
AND BANNER INSTALLATION GUIDE

01 - Contents: Two [2] metal feet, two [2] large telescoping poles, two [2] small telescoping poles with fixed bolt
at end, and two [2] small telescoping poles without fixed bolts.

Jumbo Backdrop (Step 1)

02 - Attach the flat ends of one large pole to one of the metal feet using a screw.  Repeat with the other large pole and metal foot.

Jumbo Backdrop (Step 2)

03 - Connect one of the small poles with a fixed bolt to one of the small poles without a fixed bolt by screwing them together.  Repeat this with the remaining poles. You should now have two long poles with a nut at each of their ends.

Jumbo Backdrop (Step 3)

04 - Lay the banner out flat and adjust the poles to be wider then the width of the banner.

Jumbo Backdrop (Step 4)

05 - Insert one long pole through the banner's bottom pole pocket, then attach this pole horizontally to both of the vertical poles with the nuts on either side near the base.

Jumbo Backdrop (Step 5)

06 - Repeat the actions from Step 5 for top pole pocket of the banner and attach this using the top holes on the vertical poles.

Jumbo Backdrop (Step 6)

07 - YOUR JUMBO BACKDROP BANNER STAND IS READY TO USE!

Jumbo Backdrop (Step 7) - Done!

Add Feedback