X-Stand Set-Up (All Sizes) Instructions

X-STAND SET-UP GUIDE
(SIZE: ALL — 1-SIDED)

01 - This is how your stand will look when it arrives and is unpacked.

02 - Connect rods so that you have a combined total of four [4].

03 - Insert the non-hooked ends of the four rods each into a hole on the circular metal hub.

04 - Attach banner to hooks on the upper arms first, then the lower.

05 - Bend the central metal pole just below the circular metal hub backwards to stabilize the stand as needed.

06 - YOUR SINGLE-SIDED X-STAND IS READY TO USE!

Add Feedback