L-STAND SET-UP AND BANNER
INSTALLATION GUIDE (72"×24")
01 - Contents: One  three-piece pole, one  base (L bracket with bolt), and two  clip bars (already attached to the banner before shipping).
02 - Assemble the three-piece pole.
03 - Screw bottom of three-piece pole onto bolt at the bottom of the L-bracket base.
04 - Unroll banner and lay it out flat, face down. Insert tab from base into the slot on the banner's bottom clip bar.
05 - Insert tab at top of pole into the slot on the back of the banner's top clip bar.
06 - Adjust tension-nuts on the bottom side of the lower clip bar to stabilize the stand as needed.
07 - YOUR 72"×24" L-STAND IS READY TO USE!